Tuttio Soleil 01 Rear Mudguard

Choose from two finishes:

• Glossy Black – Classic, minimal design to match most bikes.
• Carbon-Style Finish – A plastic mudguard with a carbon-fiber appearance for a more aggressive, premium look.

⚠️ Important Fitment Notice
This is a generic rear mudguard that can be fitted to the Tuttio Soleil 01.

• It cannot be mounted with screws.
• Installation requires the use of zip ties to secure it in place.
• Zip ties must be secured around the bar connecting the frame to hold it in place.

• Made from tough plastic with a carbon-style pattern. Looks like carbon fiber, but isn’t real carbon fiber

Installation Steps:

Preparation

• Place the bike on a stable stand.
• Clean the swingarm and suspension area so the mudguard sits properly.

Position the Mudguard

• Place the mudguard under the rear suspension, above the wheel, as shown in the picture.
• Ensure the mudguard is centered and aligned to block dirt from reaching the suspension spring.

Attach with Zip Ties

• Use the provided zip ties to secure the mudguard’s mounting tabs to the frame or swingarm (refer to the picture for positioning).
• Thread the zip ties through the holes in the mudguard brackets and around the frame tubing.
• Pull the zip ties tight so the mudguard does not shift.

   

Check Clearance

• Make sure the mudguard does not touch the tire when the suspension compresses.
• Verify it doesn’t interfere with the brake hose, chain, or wheel movement.

Trim Excess Zip Tie

• Once secured, cut off the extra length of the zip ties for a clean finish.